Using The Boot Terminal Bar Code; Resetting The Terminal - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Using the Boot Terminal Bar Code

The terminal will boot after you scan this bar code:
Boot Terminal
*-.1*
*-.1*

Resetting the Terminal

If the terminal or application is locked up and the terminal will not respond to any key
sequences, you can reset the terminal. Before you reset the terminal, try the following
in order:
•
•
If the terminal or application still will not respond, boot the terminal.
6-14
9
Press to turn off the terminal.
Scan the Reset Firmware label to restart the firmware and application.
Reset Firmware
*-.*
*-.*
C d 39
Nugget