Parity - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Parity

Purpose: Sets the parity for the serial port. The terminal uses parity for error checking in data
transmissions.
Syntax: YBn.data
where n is:
1
2
Acceptable values for data are:
0
1
2
Default: Even
Scan: To set the default parity, scan one of these bar codes:
Even Parity for COM1
*$+YB1.1*
*$+YB1.1*
Even Parity for COM2
*$+YB2.1*
*$+YB2.1*
Or: To set the parity:
1. Scan this bar code:
2. Scan one of these bar codes to set the COM port:
8-60
COM1 port
COM2 port
No parity
Even parity
Odd parity
Enter Accumulate Mode / Set Parity
*+/$+YB*
*+/$+YB*
COM1
*1.*
*1.*
C d 39
Nugg
COM2
*2.*
*2.*