Intermec Trakker Antares 2460 User Manual page 57

Once you upgrade to the new firmware, you can use all the features described in this
manual.
Each kit comes with the new firmware version, the applications, the firmware upgrade
utilities (DOS and Windows), and instructions about upgrading the terminal firmware.
You can upgrade the firmware on the 246X terminal from a host computer or PC using
serial communications. For help connecting the terminal, see "Connecting to Serial
Devices and Networks" in Chapter 2 and "Using Serial Communications on the
Terminal" in Chapter 4. Once the terminal is connected, you can upgrade the firmware.
Note: On the 2461, you can also upgrade the firmware on one or more terminals using
the Firmware Upgrade Utility on the DCS 300. For help, see the DCS 300 System
Manual.
To upgrade the firmware with the Windows utility
1. Connect the terminal to your PC.
2. From Program Manager, start the TRAKKER Antares Firmware Installation utility.
The Firmware Installation utility screen appears.
Click the Help button on the installation utility at anytime to get more information.
3. Choose the COM port, the application (firmware type), and the communications
hardware type.
4. Choose OK.
5. Scan this bar code:
Boot Terminal
*-.1*
*-.1*
Once the upgrade is complete, the terminal boots and runs the default application.
39
nugget Configuring the Terminal
3
3-11