Upc/Ean - Intermec Trakker Antares 2460 User Manual

UPC/EAN

Purpose: Enables or disables the decoding of Universal Product Code (UPC)/European Article
Numbering (EAN) symbology. UPC/EAN are fixed length, numeric, continuous
symbologies that use four element widths. A terminal that is configured to decode EAN
bar codes can decode UPC, but the reverse is not true. UPC code is a subset of EAN
code.
To define the UPC/EAN symbology, you set up to seven digits. The fifth, sixth, and
seventh digits are optional. To set the sixth digit, you must set the fifth digit. To set the
seventh digit, you must set all seven digits.
Syntax: CEdata
where data must be 4 to 7 digits selected from this list:
First digit:
Second digit:
Third digit:
Fourth digit:
Fifth digit:
Sixth digit:
Seventh digit:
Default: 1111111
First digit:
Second digit:
Third digit:
Fourth digit:
Fifth digit:
Sixth digit:
Seventh digit:
C d 39
Nugg
0 UPC-A/EAN-13 disabled
1 UPC-A/EAN-13 enabled
2 UPC-A only enabled
0 UPC-E disabled
1 UPC-E enabled
0 EAN-8 disabled
1 EAN-8 enabled
0 Supplementals are not allowed
1 Supplementals are allowed
2 Supplementals are required
0 Discard check digit
1 Transmit check digit
0 Discard number system digit
1 Transmit number system digit
0 Discard the leading zero for UPC-A
1 Retain the leading zero for UPC-A
UPC-A/EAN-13 enabled
UPC-E enabled
EAN-8 enabled
Supplementals allowed
Transmit check digit
Transmit number system digit
Retain leading zero for UPC-A
Configuration Command Reference
8
8-91