About The Applications Shipped On The Terminal; Defining Apptsk.bin And Em9560.Bin - Intermec Trakker Antares 2460 User Manual

This appendix defines the APPTSK.BIN and EM9560.BIN applications that are shipped
on the TRAKKER Antares terminals and explains how to use each application.

About the Applications Shipped on the Terminal

The TRAKKER Antares terminal ships loaded with these two applications loaded on
drive C:
•
•
This appendix explains how to use the
the terminal.

Defining APPTSK.BIN and EM9560.BIN

You can run and use
defined as follows:
APPTSK.BIN This application is the default application on all TRAKKER Antares
terminals. In some error conditions or if you exit an application, the terminal resets and
runs
EM9560.BIN This application emulates a subset of the functionality available on the
Intermec 95XX terminals, such as the 9512 and 9560. You can use
enter, transmit, and display data.
APPTSK.BIN
•
•
•
•
•
•
•
The main difference between the two applications is that you can use the
application to emulate specific functions of the 95XX terminals.
APPTSK.BIN
EM9560.BIN
APPTSK.BIN
. You can use
APPTSK.BIN
and
EM9560.BIN
Works with any protocol that is supported on the terminal. Both the terminal and
the device you are communicating with must use the same protocol (serial or
Ethernet) and parameter settings.
Displays the time and date, which you can toggle on and off.
Sends scanned or keyboard data out all serial or Ethernet ports.
Buffers the keyboard data until you press Enter.
Receives data from any serial or Ethernet port, displays the data on the terminal
screen, and parses the data for commands.
Receives data through any serial port and transmits it out the Ethernet port.
Receives data through the Ethernet port and transmits it out all serial ports.
nugget Using the Default Applications
and
APPTSK.BIN
or at any time. The two applications are
EM9560.BIN
to scan, enter, transmit, and display data.
APPTSK.BIN
include these features:
C
applications on
EM9560.BIN
to scan,
EM9560.BIN
EM9560.BIN
C-3