Scanner Mode - Intermec Trakker Antares 2460 User Manual

Scanner Mode

Purpose: Defines how the scanner operates when you activate a laser scanner that is connected to
the terminal. There are two types of modes:
•
•
Syntax: SBdata
Acceptable values for data are:
0
1
Default: One-Shot mode
Scan: One of these bar codes:
Enable One-Shot Mode
*$+SB0*
*$+SB0*
Enable Automatic Mode
*$+SB1*
*$+SB1*
C d 39
Nugg
In One-Shot mode, you must activate the laser scanner each time you want to scan a
bar code. Once you scan a bar code, the scanner turns off.
In Automatic (Auto-trigger) mode, you activate the laser scanner once to scan a
series of bar codes. When you release the trigger, the scanner turns off. To scan the
same bar code more than once, you must release the trigger, or scan a different bar
code before attempting a second scan.
One-Shot mode
Automatic mode
Configuration Command Reference
8
8-71