Code 128 - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Code 128

Purpose: Enables or disables decoding of Code 128 symbology. Code 128 is a very high density
alphanumeric symbology that supports the extended ASCII character set. It is a variable
length, continuous code that uses multiple element widths.
Syntax: CHdata
Acceptable values for data are:
0
1
2
8
Note: For help configuring ISBT Code 128, see "ISBT Code 128" later in this chapter.
Default: Standard
Scan: One of these bar codes:
Disable Code 128
*$+CH0*
*$+CH0*
Enable UCC/EAN Code 128
*$+CH2*
*$+CH2*
Notes: If you configure Standard Code 128, the terminal will not decode Function Code 1
characters in the first position of a bar code label. Any subsequent Function Code 1
characters are translated to the ASCII GS character as a separator for variable length
fields.
If you configure UCC/EAN Code 128, the terminal will decode a bar code label as
Standard Code 128 unless one of the first two characters are a start character and a
Function Code 1. In this case, the bar code label is processed as described next:
1. The Function Code 1 character is not transmitted.
2. The three symbology ID characters, ]C1, are transmitted.
3. The remaining Code 128 characters are decoded as Standard Code 128.
8-24
Disabled
Standard Code 128
UCC/EAN Code 128
ISBT Code 128
C d 39
Nugg
Enable Standard Code 128
*$+CH1*
*$+CH1*
Enable ISBT Code 128
*$+CH8*
*$+CH8*