Connecting A Keyboard - Intermec Trakker Antares 2460 User Manual

Connecting a Keyboard

You can connect a keyboard to the 246X terminal. There are two keyboard accessories
available for the terminal:
•
Alphanumeric keyboard (Part No. 068662)
•
Numeric keyboard (Part No. 069113)
You can also attach a standard PC-AT keyboard to the terminal. However, you will find
that not all of the keys on the keyboard work the same as if the keyboard were attached
to your PC.
To connect a keyboard
•
Insert the keyboard DIN connector into the keyboard connector on the 246X
terminal.
Keyboard
connector
DIN
connector
If you are using the alphanumeric keyboard accessory:
•
Intermec recommends that you use the numeric keys that run across the top of the
keyboard.
•
Pressing the Num Lock and Caps Lock keys perform the same function. If you
press Caps Lock and then press Num Lock, you cancel the function of the Caps
Lock key.
39
nugget Installing the Terminal
2
246XU.008
2-7