Flash Memory Configuration
Purpose:
Configures the use of the optional 2MB flash memory. Every 246X terminal has 2MB
of flash memory, 750K of which is available to store user applications and files. If you
have a 246X with the 4MB flash memory option, you can configure the extra 2MB of
the flash memory as a 2MB drive (D). You can store up to 32 files on drive D. If you
configure the flash memory as drive D, use this drive to store large lookup tables and
data files.
Syntax:
FFdata
The acceptable values for data are:
0
32
Default:
2MB drive D
Scan:
1. Scan this bar code:
2. Scan this bar code to save the configuration change in flash memory:
3. Scan this bar code to boot the terminal and use flash memory as drive D:
C d 39
Nugg
No drive D
2MB drive D
Configure Flash Memory as Drive D
*$+FF32*
*$+FF32*
Save Configuration in Flash Memory
*.+1*
*.+1*
Reset Firmware
*-.*
*-.*
Configuration Command Reference
8
8-39