Mounting The Terminal - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual
2-4

Mounting the Terminal

You can mount the terminal on any horizontal or vertical surface. The sloping front
panel of the 246X terminal makes reading the status lights easy at any angle and you
can rotate the screen to accommodate any viewing angle. The terminal is designed for
use in an indoor environment. Make sure that the location that you select is relatively
dust-free, stable, and dry.
Note: Make sure that you mount the terminal so that you can easily connect the power
supply to the back of the terminal.
To mount the 246X terminal
9
1. Select a flat surface. Make sure that you have easy access to the connectors, On/Off
( ) button, status lights, and screen.
2. Use the mounting template in Appendix A to mark the placement of the mounting
holes on the mounting surface.
3. Drill two mounting holes in your mounting surface.
4. Place the terminal over the mounting holes and install a screw (not provided)
through each mounting hole in the 246X terminal.
39
nugget
Mounting
screw
(2 places)
246XU.003