Where Do You Go From Here - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual
Drive E is a configurable RAM drive (up to 256K). By default, the RAM drive is not
configured and the memory is available for programmable (Malloc) memory
allocations. The contents of the RAM drive are erased when you boot or reset the
terminal, or change the backup battery. For help configuring the drive, see "RAM Drive
Size" in Chapter 8.
Note: On each drive, filenames are customer defined using eight characters with a
three-character extension.

Where Do You Go From Here?

Now that you understand the features and capabilities of your new 246X terminal, you
can use this manual to learn how to perform these tasks:
Task
Learn how to install the terminal and
connect it to your network
Learn how to change the terminal's
configuration
Learn how to use the terminal in your
data collection system and learn about
network protocols
Learn how to download and run custom
applications on your programmable
terminal
1-10
See This Chapter
Chapter 2, "Installing the Terminal"
Chapter 3, "Configuring the Terminal"
Chapter 4, "Operating the Terminal in a
Network"
Chapter 5, "Programming the Terminal"