Rename File - Intermec Trakker Antares 2460 User Manual

Rename File

Purpose: Renames a file stored on the terminal.
From Network:
...- drive:oldfilename,drive:newfilename
where:
...-
drive:
oldfilename
drive:
newfilename
Scan: 1. Scan this bar code label:
2. Scan the bar code label(s) for the file you want to rename. You can scan labels from
3. Scan this bar code label to exit Accumulate mode and rename the file.
Or: You can create your own bar code labels to rename files by creating a bar code in this
command format:
...- drive:oldfilename,drive:newfilename
Example: To rename the file
...-c:shipping.bin,c:dock1.bin
nugget
is the command to rename a file.
indicates the drive where the oldfilename is stored. You must include
the colon (:) after the drive letter.
is the name of the file you want to rename.
indicates the drive where the newfilename is stored. You must include
the colon (:) after the drive letter. The drive letter MUST match the
drive letter you entered for the oldfilename.
is the new name of the file.
Enter Accumulate Mode / Rename File
*+/...-*
*+/...-*
the "Full ASCII Bar Code Chart" in Appendix B. The label must use this format:
drive:oldfilename,drive:newfilename
Exit Accumulate Mode
*-/*
*-/*
SHIPPING.BIN
39
Reader Command Reference
on drive C to
DOCK1.BIN
7
, use this command:
7-21