Intermec Trakker Antares 2460 User Manual page 197

Nugg
Or: To configure ISBT Code 128:
Note: To scan the following bar codes, you must configure the terminal to use Code 39
in Full ASCII mode. For help, see "Code 39" earlier in this chapter.
1. Scan this bar code:
Enter Accumulate Mode / Enable ISBT Code 128
*/K/O/D/KCH8*
*+/$+CH8*
2. Scan one of these bar codes to disable or enable symbology ID:
Symbology ID Disabled
*0*
*0*
Note: Steps 3 through 9 are optional.
3. Scan one of these bar codes to disable or enable concatenation:
Disable Concatenation
*0*
*0*
If you disabled concatenation, go to Step 10.
4. Scan one of these bar codes to set the Left Data ID:
Blood Groups and Rh
*%H/E*
*=%*
Expiration Date and Time
*/F%I*
*&>*
Collection Date and Time
*/F/J*
*&**
Manufacturer ID
*%H/I*
*=)*
C d 39
Configuration Command Reference
Symbology ID Enabled
*1*
*1*
Enable Concatenation
*1*
*1*
Expiration Date
*%H%I*
*=>*
Collection Date
*%H/J*
*=**
ISBT Product Code
*%H%G*
*=<*
Manufacturer Lot Number
*/F/I*
*&)*
8
8-49