Intermec Trakker Antares 2460 User Manual page 199

C d 39
Nugg
Manufacturer ID
*%H/I*
*=)*
Concatenation Bar Code
*%H/F*
*=&*
National Special Test
*/F/H*
*&(*
National Special Donor
*/F%F*
*&;*
National Use Bar Code (See Note)
*/F*
*&*
Note: If you scan the Donation ID Number or National Use Bar Code, go to Step 7.
7. For the Donation ID Number or the National Use Bar Code, scan an alphanumeric
bar code from Appendix B.
•
For the Donation ID Number, scan a value from 0 through 9 or uppercase A
through Z.
•
For the National Use Bar Code, scan a value from lowercase a through z.
8. Skip to Step 10 if you want to keep the default concatenation control parameters.
• The default concatenation distance is 16 mm ± 0 mm.
•
The default concatenation decode time limit is 160 msec.
If setting the concatenation decode time limit, scan these bar codes to set the time
from 001 to 999 msec. If setting the concatenation distance, scan these bar codes to
set the distance from 00 to 99 mm and the tolerance from ± 1 to 9 mm.
*0*
*0*
*2*
*2*
Configuration Command Reference
Manufacturer Lot Number
*/F/I*
*&)*
National Product Code
*/F%G*
*&<*
Unit Exclusion Status
*/F/A*
*&!*
Donation ID Number (See Note)
*%H*
*=*
*1*
*1*
*3*
*3*
8
8-51