Intermec Trakker Antares 2460 User Manual page 98

TRAKKER Antares 246X Stationary Terminal User's Manual
TRAKKER Antares FileCopy Utility Screen
4. Check the serial port and serial communications parameters to verify that the
5. Make sure the terminal is running an application that will not be updated during the
6. Select the FileCopy tab to download or upload applications and files.
5-10
settings for your PC match the values that are set for the terminal's serial port.
a. Select the COM Port Setup tab to select and configure the following:
•
PC COM port
•
246X terminal COM port
•
Communications Protocol
•
File Transfer protocol
•
Baud rate, parity, data bits, and stop bits
b. Select the Serial Communications Setup tab to verify and configure the PC
serial communications parameters.
c. Scan bar code labels to configure the COM1 or COM2 serial port parameters
on the terminal. For help, see "Configuring the Serial Port Parameters" in
Chapter 2.
file transfer. If you are in the TRAKKER Antares 2400 Menu System, exit the
menu system.
You can run the APPTSK.BIN application while transferring files. For help, see
"How to Download and Run Applications" earlier in this chapter.
39
nugget