Intermec Trakker Antares 2460 User Manual page 104

TRAKKER Antares 246X Stationary Terminal User's Manual
Configure Device Initialization Download Dialog Box
13. Repeat Steps 7 through 12 to select another application.
14. You can also download files used by your application such as an employee list or a
15. To run an application on the 246X, choose Command in the Initialization Data box.
16. Choose OK to save your changes and return to the Terminal Download
17. In the Terminals and Groups list box, choose the terminal or group you configured
18. Choose Download. A Download initiated message box appears.
19. Choose OK. The executable binary applications and files are downloaded to the
5-16
part number list.
To download additional files, choose File in the Initialization Data box. Type in the
filename including the backslash. Disable the Binary file check box and then
choose Add.
Enter the Run Program reader command and choose Add. The command appears in
the Files and Data box.
For example, to run the application SHIPPING.BIN, enter this command:
//c:shipping.bin
Configuration dialog box.
if it is not already highlighted and marked with an asterisk.
terminal or group of terminals usually within a few seconds. If you are
downloading the applications and files to many terminals, the download may take
longer. All files are downloaded and stored on the terminal's flash drive C.
39
nugget