Enter Accumulate Mode; Backspace - Intermec Trakker Antares 2460 User Manual

3. Scan this bar code label to exit Accumulate mode and enter the data record.

Enter Accumulate Mode

Purpose: Enters Accumulate mode. You can accumulate data from a series of bar code labels and
enter them as a single label.
From Network: Not supported
Scan:
Enter Accumulate Mode
*+/*
*+/*

Backspace

Purpose: Deletes the last character from the current data record being accumulated. If there is no
data in the buffer, the command has no effect.
From Network: Not supported
Scan: Backspace
*-+*
*-+*
nugget
Or, to edit the accumulated data, scan one of these bar code labels:
Backspace
*-+*
*-+*
Note: You can create one bar code label by combining Steps 1 and 2 above. Most
of the examples in this manual use one bar code label.
Exit Accumulate Mode
*-/*
*-/*
39
Reader Command Reference
Clear
*--*
*- -*
7
Enter
**
**
7-5