Equipment You Need To Get Started; Using The Terminal For The First Time - Intermec Trakker Antares 2430 Quick Start Manual

C d 39 nuggetfont
2435
This terminal has all the capabilities of the 2430 with the
additional ability for real-time communications through an RF
network. The 2435 can communicate with a host either through
the access points and the Intermec Gateway or Data Collection
Server (DCS) 30X, or directly through the access points. The
2435 can also run client/server applications, TE 2000
emulation applications, and Data Collection Browser

(dcBrowser ), which lets you run web-based applications.
The 2435 with an IEEE 802.11b radio installed
is Wi-Fi certified for interoperability with other
802.11b wireless LAN devices.

Equipment You Need to Get Started

To use the terminal, you need the following equipment:
•
Lithium-ion battery pack (P/N 073152)
•
External power supply (P/N 065236) or Z2400 battery
charger (P/N Z2400A) and external power supply
Note: Intermec recommends that you keep at least
two battery packs on hand so that you can use one
battery pack while the other is charging. You should
keep a battery pack in the 243X at all times to
prevent loss of data.

Using the Terminal for the First Time

Once you have the required equipment, follow these steps to
start using your new terminal:
1 Unpack the terminal.
2 Charge and install the battery pack (sold separately).
3 Turn on the terminal.
4 Set the time and date.
5 (Optional) Configure the serial port parameters.
6 (2435 only) Configure the network parameters.
6 Trakker Antares 243X Handheld Terminal Quick Start Guide

terminal
