Intermec Trakker Antares 2460 User Manual page 277

The terminal boots, resets all firmware, and runs the application. The initial screen
for the application appears. You see one of these screens:
APPTSK.BIN Screen
1998/01/01 12:00:00
2. Scan this bar code label to toggle the clock display on or off.
Toggle Clock Display
*CLOCKDISPLAY*
*CLOCKDISPLAY*
3. Use the application to scan bar code labels, enter data through the keyboard, and
transmit data. The next section lists some examples of how you can use the
applications.
Example 1
Use the application to troubleshoot and test communications before loading and
running your data collection application. Connect the terminal to your network. Type
data ("Hello World") on the TRAKKER Antares terminal keyboard or scan a bar code
label. The data is sent out all serial and network ports and should be received by the
host if your terminal is installed and configured correctly. Send data from the host and
verify that the data displays on the terminal screen.
Example 2
Connect a serial input device, such as a 2D scanner, to a serial port on the 2461
terminal. Data from the input device is displayed on the terminal screen and transmitted
out the network (Ethernet) port.
Example 3
Connect the 2460 to a serial port on the T2485 or T2486 terminal. Use the 2460 to
collect data and upload the data from the 2460 to the T248X. Data is transmitted to the
T248X and out the RF port to the connected network devices.
nugget Using the Default Applications
EM9560.BIN Screen
C
246XU.014
C-11