Scan Ahead - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Scan Ahead

Purpose: Enables or disables scan ahead. If you enable this parameter, you can scan a number of
labels that are held in a stack until the terminal can process the data. If you disable this
parameter, the terminal processes each label you scan before you can scan the next
label.
Syntax: SDdata
Acceptable values for data are:
0
1
Default: Disabled
Scan: One of these bar codes:
Disable Scan Ahead
*$+SD0*
*$+SD0*
Enable Scan Ahead
*$+SD1*
*$+SD1*
8-70
Disabled (scan one label at a time)
Enabled (scan many labels at a time)
C d 39
Nugg