Intermec Trakker Antares 2460 User Manual page 103

4. From the Terminal Download Configuration dialog box in the Terminals and
Groups list box, select a terminal or group of terminals to receive the binary
applications and files.
For help defining a group of terminals, see "Adding a Group in the Download
Server" in Appendix C of the DCS 300 System Manual.
5. Choose Edit. The Configure Device Initialization Download dialog box appears.
6. Verify that there are no files (or entries) listed in the Files and Data list box. If there
are entries, then choose Clear to remove them.
7. In the Initialization Data box, choose File.
8. In the field, type:
\ filename
where filename is the name of the executable binary application. Or choose Find,
select your application, and choose OK.
9. Enable the Binary file check box.
10. Enable the Overwrite option button to overwrite an existing file with the same
name.
11. In the Target file name field, type a name if you want to save the file under a
different name on the terminal.
Do NOT enter a slash or backslash character before the target filename.
12. Choose Add. The file appears in the Files and Data list box with a B for binary in
the leftmost column.
39
nugget Programming the Terminal
5
5-15