What Are The 246X Stationary Terminals; Models And Options For The 246X Terminals - Intermec Trakker Antares 2460 User Manual

1
Introducing the 246X Stationary Terminal

This chapter introduces the TRAKKER Antares 246X stationary terminals. You will
learn about the terminal connectors and learn how to understand the terminal's status
lights, status beeps, power, memory, and drives.

What Are the 246X Stationary Terminals?

The TRAKKER Antares 246X stationary terminals (2460 and 2461) are desktop data
collection terminals. You can use these programmable terminals to run client/server
applications such as work-in-process, time and attendance, or document tracking.
You use the 2460 and 2461 terminals to collect and upload data to a host computer via
serial or Ethernet communications. You can configure the terminal by scanning bar
codes or by downloading configuration commands from your host.
Note: The 246X terminals communicate with either the DCS 300 or the Model 200
Controller. The DCS 300 is a data collection server that replaces the Model 200
Controller.
246XU.001

Models and Options for the 246X Terminals

The 246X terminals include these models:
2460 The 2460 is a programmable data collection terminal that uses serial ports to
transmit data to and receive data from a host or PC. The 2460 has two serial ports,
COM1 and COM2.
2461 The 2461 is a programmable data collection terminal that has both a serial port
and an Ethernet connector to transmit data and receive data. You can choose either
UDP Plus (DCS 300 network) or TCP/IP network protocol.
1-3