Data Bits - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Data Bits

Purpose: Sets the number of data bits the terminal uses when communicating with another device
(i.e., host computer) through the serial port.
Syntax: YIn.data
where n is:
1
2
Acceptable values for data are:
7
8
Default: 7
Scan: To set the default data bits, scan one of these bar codes:
Default Data Bits for COM1
*$+YI1.7*
*$+YI1.7*
Default Data Bits for COM2
*$+YI2.7*
*$+YI2.7*
Or: To set the data bits:
1. Scan this bar code:
2. Scan one of these bar codes to set the COM port:
8-32
COM1 port
COM2 port
7 data bits
8 data bits
Enter Accumulate Mode / Set Data Bits
*+/$+YI*
*+/$+YI*
COM1
*1.*
*1.*
C d 39
Nugg
COM2
*2.*
*2.*