Nugg
Scan:
To set the default subnet mask address, scan this bar code:
Default Subnet Mask
*$+NS255.255.255.0*
*$+NS255.255.255.0*
Or:
To set the subnet mask:
1. Scan this bar code:
Enter Accumulate Mode / Set Subnet Mask
*+/$+NS*
*+/$+NS*
2. Scan a numeric value from 0 to 255 to set an n field of the subnet mask address
from these bar codes.
*0*
*0*
*2*
*2*
*4*
*4*
*6*
*6*
*8*
*8*
3. Scan this bar code:
. (Period)
*.*
*.*
4. Repeat Steps 2 and 3 to set the next three numbers in the subnet mask address field.
After you scan the last address segment, go to Step 5. Do not scan the period after
the last address segment.
C d 39
Configuration Command Reference
*1*
*1*
*3*
*3*
*5*
*5*
*7*
*7*
*9*
*9*
8
8-81