TRAKKER Antares 246X Stationary Terminal User's Manual
Code 49
Purpose:
Enables or disables decoding of Code 49 symbology. Code 49 is a multirow symbology
for high data density. The last character in each row is used for row checking and the
last two characters of the symbol are used for overall checking.
Function codes designate where to place the predefined data string in a Code 49 label.
Whenever a terminal encounters a function code, it replaces the function code with the
defined string before transmitting the data to the DCS 300. A single Code 49 symbol
may contain several different variable length data fields. Function Code 1 (F1)
identifies a data system. Function Code 2 (F2) indicates the end of a data field.
Syntax:
CJdata
CKdata
CLdata
CMdata
Acceptable values for data are:
Code 49:
Function Code 1:
Function Code 2:
Function Code 3:
Default:
Disabled
Scan:
One of these bar codes:
Disable Code 49
*$+CJ0*
*$+CJ0*
Scan:
To disable any of the function codes, scan one of these bar codes:
Disable Function Code 1
*$+CK*
*$+CK*
Disable Function Code 3
*$+CM*
*$+CM*
8-22
Code 49
Function Code 1
Function Code 2
Function Code 3
0
Disabled
1
Enabled
Any two ASCII characters.
Any four ASCII characters
Any two ASCII characters
C d 39
Nugg
Enable Code 49
*$+CJ1*
*$+CJ1*
Disable Function Code 2
*$+CL*
*$+CL*