Code 2 of 5
Purpose:
Enables or disables decoding of Code 2 of 5 symbology. Code 2 of 5 uses the bars to
encode information and the spaces to separate the individual bars. This code is discrete
and self-checking. You can only enable Code 2 of 5 if the Interleaved 2 of 5 (I 2 of 5)
code is disabled. If you enable I 2 of 5, Code 2 of 5 is automatically disabled.
Syntax:
CCdata
where data consists of three digits as follows:
First digit:
Second and
third digits:
Default:
Disabled
Scan:
To disable Code 2 of 5, scan this bar code:
Disable Code 2 of 5
*$+CC000*
*$+CC000*
Or:
To enable Code 2 of 5:
1. Scan one of these bar codes:
C d 39
Nugg
0
Code 2 of 5, 3 Bar Start/Stop
1
Code 2 of 5, 2 Bar Start/Stop
00
Disable Code 2 of 5
01-32
Label Length
Code 2 of 5, 3 Bar Start/Stop
*+/$+CC0*
*+/$+CC0*
Code 2 of 5, 2 Bar Start/Stop
*+/$+CC1*
*+/$+CC1*
Configuration Command Reference
8
8-17