Intermec Trakker Antares 2460 User Manual page 289

timeout, scanner, configuring, 8-74
TMF protocol
defined, 4-27 to 4-29
fields, defined, 4-10, 4-18, 4-20
TRAKKER Antares 2461 terminal
2.4 GHz RF network, illustrated, 4-12
applications, downloading, 4-22, 5-14
configuring from DCS 300, 4-16
installing, overview, 4-12
TRAKKER Antares Crossbar adapter, 1-4, 2-10
TRAKKER Antares FileCopy utility screen, 5-10
TRAKKER Antares Programmer's Software Kit (PSK),
See PSK
TRAKKER Antares terminal
bar code symbologies, enabling, 3-7
booting and resetting, 6-13 to 6-14
configuring
from host, 4-9
summary of methods, 3-3
default configuration, list of, A-8 to A-10
dimensions, A-3
drives, described, 1-9
firmware, upgrading, 3-10
introduction, 1-3
manual, audience and purpose, xiv
network, overview, 4-3, 4-12
operating, troubleshooting, 6-4 to 6-5
programmability, using, 5-3
resetting firmware and hardware, 6-14
specifications
electrical, A-3
memory, A-4
power, A-3
programmable, 5-4
temperature, A-3
terminal dimensions, A-3
terminology, defined, xvi
troubleshooting, guide to, 6-3
transaction header, defined, 4-18
transaction ID, creating, 4-18
Transmit File reader command, 7-23 to 7-28
troubleshooting
applications, 5-17
bar code symbologies, 3-7, 6-4, 6-12
Crossbar network, required adapter, 2-10
DCS 300, 6-10
Ethernet communications, 6-6
Ethernet network communications, 6-9
Frame mode, 6-7
guide to finding problems, 6-3
Intermec support services, xiii
no power, 6-4
operating the terminal, 6-4 to 6-5
scanning bar code labels, 6-11 to 6-12
serial communications, 6-9
serial network, 6-7
terminal locked up, 6-5, 6-14
turning on the terminal 9
button, 2-18
first time, 2-13
U
UCC/EAN Code 128, enabling, 8-24
UDP Plus network
configuration commands, using, 8-3
configuring the 2461, 4-17
DCS 300, configuring, 4-13
file management commands, using, 7-13
firmware, upgrading, 3-10
illustrated, 4-12
protocol, defined, 4-27 to 4-29
reader commands, using, 7-3
transmitting files, 5-14, 7-19, 7-27
UDP Port, 8-58. See Network Port command
Universal Product Code, See UPC/EAN command
UPC/EAN command, 8-91
UPC-A/EAN-13, enabling, 8-91
UPC-E, enabling, 8-91
upgrading the firmware, 3-10
uppercase letters, bar code labels to scan, B-9
User Defined status lights, 1-6
V
variable data, entering in commands, 7-3, 8-6
volume, adjusting the beep, 8-11
voting, Scanner Redundancy command, 8-72
W
wands
configuring for scan module, 8-73
list for scanner connector, A-5
warm boot, 6-14, 7-9
warnings, defined, xiv
warranty information, xiii
weight, of the terminal, A-3
X
XMODEM protocol, defined, 4-6, 4-27
XMODEM-1K, defined, 7-15
XON/XOFF, set by flow control, 8-40
Y
YMODEM protocol, defined, 4-6
I
Index
I-11