Intermec Trakker Antares 2460 User Manual page 140

TRAKKER Antares 246X Stationary Terminal User's Manual
Receive File Via Network Communications (continued)
Scan: 1. Scan this bar code label:
2. Scan the bar code label(s) for the file you want to receive. You can scan labels from
3. Scan this bar code label to exit Accumulate mode and receive the file.
Or: You can create your own bar code labels to receive files by creating a bar code in this
command format:
.%R, fromfilename,drive:tofilename
Example: To receive the file
.%R,shipping.bin,c:shipping.bin
7-20
Enter Accumulate Mode / Receive File
*/K/O./ER/L*
*+/.%R,*
the "Full ASCII Bar Code Chart" in Appendix B. The label must use this format:
fromfilename,drive:tofilename
Exit Accumulate Mode
*-/*
*-/*
SHIPPING.BIN
39
nugget
on the terminal's drive C, use this command: