Terminal Ip Address - Intermec Trakker Antares 2460 User Manual

3. Scan this bar code:

Terminal IP Address

Purpose: Defines the IP address assigned to the 2461 terminal in your Ethernet network. An IP
address is a unique network level address you assign to each device in a TCP/IP
network. The IP address you set on the 2461 must match the address that is set on the
server or host computer.
Syntax: NDn.n.n.n
where each n address segment is a number from 0 to 255. The terminal IP address field
consists of four separate numbers, each separated by a period.
Note: The Ethernet network cannot be activated if the first address segment in the IP
address is set to 0, 127, or a number greater than 223.
Default: 0.0.0.0
Scan: To set the default terminal IP address, scan this bar code:
Default Terminal IP Address
*$+ND0.0.0.0*
*$+ND0.0.0.0*
C d 39
Nugg
*4*
*4*
*6*
*6*
*8*
*8*
Exit Accumulate Mode
*-/*
*-/*
Configuration Command Reference
*5*
*5*
*7*
*7*
*9*
*9*
8
8-85