Receive File; Receive File Through The Serial Port - Intermec Trakker Antares 2460 User Manual

Or: You can create your own bar code labels to delete files by creating a bar code in this
command format:
..-- drive:filename
Example: To delete the file
..--c:shipping.bin

Receive File

There are three ways to receive files on the TRAKKER Antares terminals:
•
•
•
For help connecting the terminal to a host computer or the DCS 300, see Chapter 4,
"Operating the Terminal in a Network."

Receive File Through the Serial Port

Purpose: Receives a file from the host computer through the serial port and saves it on the 246X
terminal. You must have the terminal connected to the host through a serial port. For
help, see Chapter 2, "Installing the Terminal."
On the host, you need to transmit the file using a serial communications package (i.e.,
Windows 3.1 Terminal, Win95 Hyperterminal, Crosstalk, or Procomm) that supports
one of these protocols:
•
•
•
XMODEM-1K
standard 128-byte
throughput.
data and it preserves the length of the file without padding. With
also receive a batch of files on the 246X terminal.
Note: 246X terminal filenames are up to eight characters with a three-character
extension. Files you transfer from the host need to use the TRAKKER Antares naming
conventions.
nugget
SHIPPING.BIN
Use the serial port to receive files on the 246X terminal.
Use the serial port to receive and convert 7-bit ASCII files to 8-bit binary files on
the 246X terminal.
Use network communications to receive files on the 2461 terminal.
XMODEM
XMODEM-1K
YMODEM
is a version of
XMODEM
has the additional ability to transfer a file name with the file's
YMODEM
39
Reader Command Reference
from drive C, use this command:
that supports 1024-byte blocks as well as the
XMODEM
data blocks. The larger block size increases the
7
, you can
YMODEM
7-15