Connecting To A Bluetooth Audio Device; Configuring Ethernet Communications - Intermec CK3a1 User Manual

Connecting to a Bluetooth Audio Device

Use the Bluetooth Audio applet to discover, activate, and connect to
Bluetooth audio devices such as a Bluetooth headset.
To connect to a Bluetooth audio device
1 Select Start > Settings > the System tab > Bluetooth Audio. The
2 Follow the onscreen instructions to connect to a Bluetooth audio

Configuring Ethernet Communications

You connect your CK3 to your Ethernet network with an ethernet
cable and one of these accessories:
•
•
To use your CK3 in an Ethernet network
1 Connect your CK3 to an ethernet network with an AD20 or AD21.
2 Configure these network parameters:
CK3 Mobile Computer User's Manual
Bluetooth Audio screen appears.
device.
AD20 single dock with an AA12 ethernet adapter
AD21 ethernet multidock
Ethernet communications is automatically enabled on your CK3.
• If you have a DHCP server, enable DHCP.
• If you do not have a DHCP server, set these parameters:
a IP address
b Subnet mask
Chapter 2 — Connecting and Configuring the CK3
33