Configuring Ethernet Communications - Intermec CN4 User Manual

Chapter 2 — Connecting and Configuring the CN4

Configuring Ethernet Communications

46
2 Follow the onscreen instructions to connect to a Bluetooth audio
device.
You connect your CN4 to your Ethernet network with an Ethernet
cable and one of these accessories:
• AD10 single dock with an Ethernet/modem (AA12/AA13) adapter
• AD11 Ethernet multidock
• AA16 Ethernet snap-on adapter
To use your CN4 in an Ethernet network
1 Connect the CN4 to an Ethernet network with an AD10, AD11, or
AA18. Ethernet communication is enabled by default on the CN4.
2 Configure these network parameters:
• If you have a DHCP server, enable DHCP.
• If you do not have a DHCP server, set these parameters:
a IP address
b Subnet mask
c Default router
3 If necessary, set these parameters:
• Primary and secondary DNS servers
Primary and secondary WINS servers
•
CN4 Series Mobile Computer User's Manual