Resume Execution - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Resume Execution

Purpose: Defines the way in which the terminal resumes when you press
terminal. If you set this parameter to resume not allowed and you press
terminal, the terminal will boot and restart the application that was running when you
turned off the terminal. If you set this parameter to resume allowed and press
on the terminal, the terminal resumes using the application exactly where it was when
you turned off the terminal.
Syntax: ERdata
Acceptable values for data are:
0
1
Default: Allowed
Scan: One of these bar codes:
Resume Execution Not Allowed
*$+ER0*
*$+ER0*
Resume Execution Allowed
*$+ER1*
*$+ER1*
8-68
Not allowed
Allowed
C d 39
Nugg
9
9
to turn on the
to turn on the
9
to turn