Intermec Trakker Antares 2460 User Manual page 153

Configuration Commands Listed by Category (continued)
Operations
Append Time, 8-7
Automatic Shutoff, 8-7
Beep Volume, 8-11
Character Set, 8-12
Command Processing, 8-25
Decode Security, 8-33
Flash Memory Configuration, 8-39
Keypad Caps Lock, 8-52
Keypad Clicker, 8-53
Postamble, 8-64
Preamble, 8-65
RAM Drive Size, 8-66
Resume Execution, 8-68
Scan Ahead, 8-70
Scanner Mode, 8-71
Scanner Redundancy, 8-72
Scanner Selection, 8-73
Scanner Timeout, 8-74
Scanner Trigger, 8-75
Suspend/Resume Control, 8-82
Time and Date, 8-87
Time in Seconds, 8-88
C d 39
Nugg
Serial Network Communications
Baud Rate, 8-9
Configuration Commands Via Serial Port, 8-28
Data Bits, 8-32
End of Message (EOM), 8-37
Flow Control, 8-40
Handshake, 8-42
LRC (Longitudinal Redundancy Check), 8-54
Multi-Drop Address, 8-56
Parity, 8-60
Poll (Polling), 8-62
RS-232 or RS-422/485 COM2 Interface, 8-69
Serial Port Protocol, 8-76
Start of Message (SOM), 8-78
Stop Bits, 8-79
Timeout Delay, 8-89
Configuration Command Reference
8
8-5