Ram Drive Size - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual
Preamble (continued)
3. Scan this bar code:
Example: You want to set a preamble that includes quotation marks. Enter the preamble by
scanning this full ASCII bar code label:
Set Preamble to "B"
*/D/KAD/B/B/BB/B/B/B*
*$+AD"""B"""*
You must enclose the data within quotation marks and precede each quotation mark
with another quotation mark so that the quotation marks are not treated as the end of the
data.

RAM Drive Size

Purpose: Configures the size and use of the RAM drive (E). You can disable the RAM drive and
use the additional 256K for programmable (Malloc) memory allocations or configure
the RAM drive to temporarily store data and files.
Important: After you set the RAM drive, you must save the configuration in flash
memory and boot the terminal for the change to take effect.
Note: When you boot or reset the terminal, all files on the RAM drive are destroyed.
Syntax: FRdata
Acceptable values for data are:
0
16-256
Default: 0
Scan: To disable the RAM drive, scan this bar code:
Disable RAM Drive
*$+FR0*
*$+FR0*
8-66
Exit Accumulate Mode
*-/*
*-/*
Disabled, no RAM drive
RAM drive size in kilobytes (K)
C d 39
Nugg