Multiple-Read Labels; Reset Firmware - Intermec Trakker Antares 2460 User Manual

Multiple-Read Labels

Purpose: A multiple-read label is a Code 39 or Code 93 bar code label that has a space as the first
character after the start code. The terminal stores a multiple-read label in the buffer
until you execute a command to transmit the label or scan a regular label. A regular bar
code label is executed as soon as you scan it.
If you use a configuration command to disable multiple-read labels, the terminal
processes the bar code label as a regular label and reads and decodes the space as data.
From Network: Not supported
Label Syntax: <Start Code><SP>data<Stop Code>
where <SP> is the ASCII space character and data is the content of the label.
Example: Multiple-Read Bar Code Label
* A*
* A*
After you scan a multiple-read bar code label, the accumulated data appears on the
bottom line of the terminal screen. You can use the Accumulate mode commands, such
as Backspace or Clear, to accumulate data. Once you scan a non-multiple-read label,
the data is entered.

Reset Firmware

Purpose: Resets all firmware on the terminal, resets the application, and runs the application.
You can use the Reset command to restart your application if you are having problems.
From Network: -.
Scan: Reset Firmware
*-.*
*-.*
39
nugget Reader Command Reference
7
7-9