Default Configuration - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual

Default Configuration

The next tables show the terminal's default configuration. If you need to restore the
terminal to the default configuration, see "Restoring the Terminal's Default
Configuration" in Chapter 3.
Default Configuration for Bar Code Symbologies
Parameter
Codabar
Code 11
Code 16K
Code 2 of 5
Code 39
Code 49
Code 93
Code 128
Interleaved 2 of 5
MSI
Plessey
UPC/EAN
A-8
nugget
Default
Disabled
Disabled
Disabled
Disabled
Full ASCII Code 39 enabled with no check digit
Disabled
Disabled
Standard
Disabled
Disabled
Disabled
UPC-A/EAN-13 enabled, UPC-E and EAN-8 enabled,
supplementals allowed, transmit check digit, transmit number
system digit, and retain leading zero for UPC-A
39