Poll (Polling) - Intermec Trakker Antares 2460 User Manual

TRAKKER Antares 246X Stationary Terminal User's Manual
Plessey (continued)
Scan: To disable Plessey:
Disable Plessey
*$+CI00*
*$+CI00*
Or: To set Plessey, complete these steps:
1. Scan this bar code:
2. Scan one of these bar codes to transmit or retain the check digit:

Poll (Polling)

Purpose: Solicits or requests data from a polled device.
Note: Before you can enable Poll, you must configure the EOM and Handshake
commands.
Syntax: YRn.data
where n is:
1
2
Acceptable values for data are:
Disabled
Enabled
Default: Disabled
8-62
Plessey With Reverse Start Code
*$+CI10*
*$+CI10*
Transmit Check Digit
*$+CI30*
*$+CI30*
COM1 port
COM2 port
No polling
Set to FS (File Separator, hexadecimal value \x1c)
C d 39
Nugg
Discard Check Digit
*$+CI31*
*$+CI31*