Installing And Connecting The Dc Power Supply - Intermec Trakker Antares 2475 Installation Instructions Manual

Trakker Antares 2475 Vehicle-Mount Terminal Installation Instructions
To install the mounting bracket on the vehicle using the rail mount
1. Attach the mounting plate to the 2475. For help, see the procedure "To attach a
mounting plate to the 2475" on page 8.
2. Install the rail mount on a rail on the vehicle as shown.
Rail
Rail
mount
Screw
(2 places)
3. Attach the mounting arm to the rail mount on the vehicle.
a. Squeeze the top of the mounting arm. The top of the mounting arm contains the
spring.
b. Position the bottom of the mounting arm over the ball on the rail mount, and
release the mounting arm.
4. Attach the 2475 to the mounting arm. For help, see the procedure "To attach the
2475 to the mounting arm" on page 10.

Installing and Connecting the DC Power Supply

You need to install the DC power supply and connect the power supply to the vehicle
battery and to the 2475. You need one of these DC power supply kits:
•
Low-input voltage kit (10 to 36 VDC) (Part No. 067698)
•
High-input voltage kit (15 to 96 VDC) (Part No. 067699)
The next illustration shows how the DC power supply and cables are installed with your
vehicle battery and the 2475.
Nut
(2 places)
2475I019.eps
11