Table of Contents
Advertisement
1. DEV (Device Configuration)
M90 Series Portable Data Entry Unit Reference Manual
2 Press [1] to access the Supervisor Mode:
<SUPERVISOR>
PASSWORD:
J
Note: A supervisor password prevents unauthorized users from changing
configuration parameters. The M90 system forces the user to enter Ready
Mode after five unsuccessful attempts to enter a correct password. "M90"
is the default password.
The Supervisor Mode menu appears with the following parameters:
1.DEV
2.TERM
3.MEM
4.ALRM
5.PWR
6.PSWD
7.SYS
8.DIAG
Select option 1.DEV from the Supervisor Mode menu to configure the
M90 device parameters:
<DEVICE CONFIG>
1.KEYPAD
2.SERIAL
3.BARCODE _
1. KEYPAD
Select option 1.KEYPAD from the Device Config menu to select one of
seven languages for the keypad. Press A or " to toggle between "Italian,"
"English" (default), "Sweden/Finland," "Danish," "Spanish," "French,"
and "German," then press [ENT SCAN]:
< KEYPAD SETUP >
LANGUAGE
English
_
2. SERIAL
Select option 2.SERIAL from the Device Config menu to send or receive
data or programs using RS-232, and to set these and other M90 commu-
nication parameters. Press and release [FN], then press " to return to the
Device Config menu without changes. Press [ENT SCAN] to scroll
through these parameter menus:
—
Chapter 3
Operation Modes
25
Advertisement
Table of Contents
