Default Configuration - Intermec CN4 User Manual

Appendix B — Default Settings

Default Configuration

96
The following tables list the default values of the configuration
commands supported on the CN4. If you restore the CN4 to factory
default settings, the CN4 uses these values.
The commands are grouped by function and reflect the organization
of Intermec Settings. For detailed information on most of the
commands, see the Intermec Computer Command Reference Manual
(P/N 073529), available from the Intermec web site at
www.intermec.com.
Data Collection
Data Collection Setting
Enable scanner port
Enable scanner auto-detect
Symbology
AustraliaPost
Aztec
BPO
CanadaPost
ChinaPost
Codabar
Codablock A
Codablock F
Code 11
Code 39
Code 93
Code 128/GS1-128
DataMatrix
DutchPost
EAN/UPC
EAN.UCC Composite
Default Value
Enable
Enable
Default Value
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Disable
Enable
Disable
Enable
Enable
Disable
Enable UPC A, UPC E,
EAN 8, EAN 13
Disable
CN4 Series Mobile Computer User's Manual