Choosing Your Te 2000 Configuration - Intermec Trakker Antares 2410 Quick Start Manual

C d 39 nuggetfont
Depending on the radio that is in the devices, you must match
certain parameters on the 2415s and on the access points.
Press ( \ 2 4 8 to access the TRAKKER Antares 2400
Menu System. Choose Configuration Menu >
Communications Menu > Radio.
To configure the OpenAir radio parameters
1 In the Domain field, enter a number from 0 to 15. The
terminal can only communicate with access points that have
the same domain.
2 In the Security ID field, enter up to 20 alphanumeric
characters or leave the field blank. The terminal can only
communicate with access points that have the same security
ID.
To configure the 802.11b radio parameters
1 In the Network Name field, enter up to 32 alphanumeric
characters. The terminal can only communicate with access
points that have the same network name
2 Configure the security parameters:
• (non-802.1x security) Enable WEP Encryption and select
a WEP Transmit Key. Enter a WEP key value: WEP 64
requires 5 ASCII characters or hex pairs, and WEP 128
requires 13 ASCII characters or hex pairs.
• (802.1x security) Configure the User Name and
Password.

Choosing Your TE 2000 Configuration

If you have a TE 2000 application, your terminal is configured
for TE 2000 VT/ANSI by default. You may need to change the
configuration to TE 2000 5250 or TE 2000 3270.
14 Trakker Antares 241X Handheld Terminal Quick Start Guide