Configuring The Network Parameters For A Tcp/Ip Network - Intermec CK31 User Manual

Chapter 2 — Configuring the CK31

Configuring the Network Parameters for a TCP/IP Network

In a TCP/IP network, the CK31 communicates directly with a
host computer using TCP/IP. The access point acts as a bridge
to allow communications between the wired network and the
wireless network.
CK31 in a TCP/IP Direct Connect Network
To use wireless communications in a TCP/IP network
1 Configure these network parameters on each CK31 in the
network:
• Network name (SSID)
• IP settings (if not using DHCP)
44
TCP/IP
Direct Connect
Ethernet
Access point
CK31s
CK31 Handheld Computer User's Manual
Host