Connecting To A Bluetooth Scanner - Intermec CK3a1 User Manual

Connecting to a Bluetooth Scanner

You can connect to an Intermec Bluetooth scanner, such as the SF51
or SR61, using one of these methods:
•
•
To connect to a Bluetooth scanner with the association label
1 Make sure that the Bluetooth radio on your CK3 is enabled and
2 Make sure that your Bluetooth scanner is on.
3 With your Bluetooth scanner, scan the Bluetooth association bar
4 When prompted, enter the passcode for your scanner. The default
5 Tap Finish.
To connect to a Bluetooth scanner with the Wireless Scanning Wizard
1 Select Start > Settings > the System tab > Wireless Scanning.
2 Follow the onscreen instructions to connect to a scanner.
CK3 Mobile Computer User's Manual
Scan the association bar code label that ships with the CK3.
Run the Wireless Scanning Wizard.
that your CK3 is visible and connectable.
code label that ships with the CK3.
passcode for Intermec Bluetooth scanners is 0000.
Chapter 2 — Connecting and Configuring the CK3
31