Codablock F Settings; Code 11 Settings - Intermec CN51 User Manual

Chapter 3 — Use the Scanner
48

Codablock F Settings

This section lists all configurable settings for decoding the Codablock
F symbology.
Codablock F Settings and Descriptions
Setting
User defined symbology ID
Code mark

Code 11 Settings

This section lists all configurable settings for decoding the Code 11
symbology.
Code 11 Settings and Descriptions
Setting
Verify check digit
Transmit check digit
User defined symbology ID
Code mark
Description
Sets the symbology ID for Codablock F.
Range is 1 to 4 ASCII characters. \xFF is
not supported.
Default is K1.
A one-character code mark that serves as
an identifier for Codablock F.
Default is *.
Description
Sets the check digit to 1 or 2 digits.
Default is 2.
Enables or disables transmission of the
check digit as part of the bar code data.
Default is enabled.
Sets the symbology ID for Code 11. Range
is 1 to 4 ASCII characters. \xFF is not
supported.
Default is C1.
A one-character code mark that serves as
an identifier for Code 11.
Default is *.
CN51 Mobile Computer User Manual