Port Isolation Commands; Display Port-Isolate Group - HP 12500 Series Command Reference Manual
Routing, layer 2 - lan switching
Hide thumbs
Also See for 12500 Series:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (157 pages)
Table of Contents
Advertisement
Port isolation commands
display port-isolate group
Use display port-isolate group to display port isolation group information.
Syntax
display port-isolate group [ group-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
mdc-admin
mdc-operator
Parameters
group-number: Specifies an isolation group number in the range of 1 to 16.
Examples
# Display information about all isolation groups.
<Sysname> display port-isolate group
Port isolation group information:
Group ID: 2
Group members:
GigabitEthernet3/0/1
Group ID: 5
Group members:
GigabitEthernet3/0/2
# Display information about isolation group 2.
<Sysname> display port-isolate group 2
Port isolation group information:
Group ID: 2
Group members:
GigabitEthernet3/0/1
Table 9 Command output
Field
Group ID
Group members
GigabitEthernet3/0/4
Description
Isolation group number.
Isolated ports in the isolation group.
38
Advertisement
Table of Contents
