Display User-Group - HP FlexFabric 7900 Series Command Reference Manual

display user-group

Use display user-group to display the user group configuration.
Syntax
display user-group [ group-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
group-name: Specifies a user group by its name, a case-insensitive string of 1 to 32 characters.
Usage guidelines
If no user group name is specified, the command displays the configuration of all user groups.
Examples
# Display the configuration of all user groups.
<Sysname> display user-group
Total 2 user groups matched.
The contents of user group system:
Authorization Attributes:
Work Directory:
The contents of user group jj:
Authorization Attributes:
Idle TimeOut:
Work Directory:
ACL Number:
VLAN ID:
Password control configurations:
Password aging:
Table 3 Command output
Field
Idle TimeOut
Work Directory
ACL Number
VLAN ID
Password control configurations
Password aging
flash:
2 (min)
flash:/
2000
2
Enabled (2 days)
Description
Idle timeout period, in minutes.
Directory that FTP, SFTP, or SCP users in the group can access.
Authorization ACL.
Authorized VLAN.
Password control attributes that are configured for the user group.
This field appears only when password aging is enabled. The aging time
is displayed in parentheses.
22