Table of Contents
Advertisement
Services
servers can be configured. If multiple servers are configured, a number of time samples are obtained
from each of the servers and a subset of the NTP clock filter and selection algorithms are applied to
select the best of these.
See
Configure the device as an NTP server
server.
Configure the device as an NTP server
Required Configuration Items
Enable the NTP service.
n
At least one upstream NTP server for synchronization. The default setting is the Digi NTP
n
server, time.devicecloud.com.
Additional Configuration Options
Additional upstream NTP servers.
n
Access control list to limit downstream access to the IX10 device's NTP service.
n
The time zone setting, if the default setting of UTC is not appropriate.
n
To configure the IX10 device's NTP service:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
IX10 User Guide
for information about configuring your device as an NTP
Use Digi Remote Manager to view and manage your
Network Time Protocol
499
Advertisement
Table of Contents
