Reboot Your Device Immediately; Schedule Reboots Of Your Device - Digi TX54 User Manual

System administration
Note You may want to save your configuration settings to a file before rebooting. See
configuration to a

Reboot your device immediately


WebUI
1. Log into the TX54 WebUI as a user with Admin access.
2. From the main menu, click System.
3. Click Reboot.
4. Click Reboot to confirm that you want to reboot the device.

Command line
1. Log into the TX54 command line as a user with Admin access.
Depending on your device configuration, you may be presented with an Access selection
menu. Type admin to access the Admin CLI.
2. At the prompt, type:
> reboot

Schedule reboots of your device


WebUI
1. Log into the TX54 WebUI as a user with full Admin access rights.
2. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
TX54 User Guide
file.
Reboot your TX54 device
Save
829