Table of Contents
Advertisement
User authentication
Change the access rights for a predefined group
By default, two authentication groups are predefined: admin and serial. To change the access rights
of the predefined groups:
Web
1. Log into Digi Remote Manager, or log into the local Web UI as a user with full Admin access
rights.
2. Access the device configuration:
Remote Manager:
a. Locate your device as described in
device.
b. Click the Device ID.
c. Click Settings.
d. Click to expand Config.
Local Web UI:
a. On the menu, click System. Under Configuration, click Device Configuration.
The Configuration window is displayed.
3. Click Authentication > Groups.
4. Click the authentication group to be changed, either admin or serial, to expand its
configuration node.
5. Click the box next to the following options, as appropriate, to enable or disable access rights
for each:
IX10 User Guide
Use Digi Remote Manager to view and manage your
Authentication groups
683
Advertisement
Table of Contents
